Runco RS-900 Series RS1100 Series 사용자 가이드
50
RS-900 and RS1100 Series Installation/Operation Manual
PRE
L
IMINAR
Y
4.5
Using
Picture-In-Picture (PIP)
Using
Picture-In-Picture (PIP)
For PIP purposes, there are two groups of inputs
separated by their display modes:
separated by their display modes:
• Video (SD) group: Video and S-Video inputs.
• Graphic (HD) group: HDMI 1, HDMI 2,
Component 1 and Component 2/RGB inputs.
PIP shows one input from the Graphic group within one input from the Video group, or
vice versa.
vice versa.
• Press PIP to enable the PIP function. Press PIP again to turn PIP off.
• To adjust the size of the PIP window, press PIP+ or PIP-.
• When PIP is active, press ACT (Active) to display the Main and Secondary source
menu.
To select a main window input source, press
or
to highlight it and press ENTER.
Then, do the same for the secondary window input source using the
,
,
and
ENTER buttons. When finished, press EXIT.
4.6
Using the On-Screen
Menus
Using the On-Screen
Menus
• Press the MENU button on the remote control to display the Main Menu. To select a
menu item, use the
and
buttons on the remote control to highlight it. Press
ENTER or
to confirm your selection.
• Use the arrow buttons to select menu items or change settings.
• Press EXIT to return to the previous menu.
• Press MENU to turn off the OSD menu. (When the Main Menu is displayed, pressing
EXIT also turns off the menu.)
The RS-900/RS1100 OSD menus are arranged hierarchically, as shown in Figure 4-1.
Depending on the selected input source and signal characteristics, some menu options
may not be available.
Depending on the selected input source and signal characteristics, some menu options
may not be available.
FOCUS
LENS
ZOOM
PIP ACT PIP + PIP -
LENS
Main
Secondary
>
>