Sony HTSS370 사용자 설명서

If an error message appears while you perform 
Auto Calibration, see “When error codes 
appear” (page 28) to solve the problem.

Clearing the receiver’s memory may remedy 
the problem (page 24). However, note that all 
memorized settings will be reset to their initial 
settings and you will have to readjust all 
settings on the receiver.

Consult your nearest Sony dealer. Note that if 
service personnel changes some parts during 
repair, these parts may be retained.
In the event of a problem with S-AIR function, 
have a Sony dealer check the entire system 
together (S-AIR main unit and S-AIR sub 
unit).

POWER OUTPUT (rated)
FRONT L + FRONT R

108 W + 108 W (at 3 ohms, 
1 kHz, 1% THD) 

POWER OUTPUT (reference)
FRONT L/FRONT R/CENTER/SUR L/SUR R

167 W (per channel at 

 

3 ohms, 1 kHz)

SUBWOOFER

165 W (at 3 ohms, 60 Hz)

Inputs 

Analog

Sensitivity: 1 V/50 kohms

Digital (Coaxial) Impedance: 75 ohms

Input/Output (HDMI Repeater block)
640 × 480p@60 Hz
720 × 480p@59.94/60 Hz
1280 × 720p@59.94/60 Hz
1920 × 1080i@59.94/60 Hz
1920 × 1080p@59.94/60 Hz
720 × 576p@50 Hz
1280 × 720p@50 Hz
1920 × 1080i@50 Hz
1920 × 1080p@50 Hz
1920 × 1080p@24 Hz

Input/Output (HDMI Repeater block)
1280 × 720p@59.94/60Hz Frame packing
1920 × 1080i@59.94/60Hz Frame packing
1920 × 1080i@59.94/60Hz Side-by-Side (Half)
1920 × 1080p@59.94/60Hz Side-by-Side (Half)
1280 × 720p@50Hz Frame packing
1920 × 1080i@50Hz Frame packing
1920 × 1080i@50Hz Side-by-Side (Half)
1920 × 1080p@50Hz Side-by-Side (Half)
1920 × 1080p@24Hz Frame packing

All memorized settings