Tascam SN29401376 사용자 설명서

■

Confirm the connection and settings.
1. Connect the HDMI OUT jack to the HDMI input 

jack of the TV.

2. Connect the audio output from the TV to the 

OPTICAL IN 2 jack of the AV receiver using an 
optical digital cable.

• When the audio return channel (ARC) function is used with 

an ARC capable TV, this connection is not necessary 
(

3. Connect the HDMI output of the Blu-ray 

Disc/DVD player/recorder to the HDMI IN 1 jack 
of the AV receiver.

• It is necessary to assign the HDMI input when connecting 

the Blu-ray Disc/DVD player/recorder to other jacks 
(

➔ page 48). Do not assign an HDMI IN to the TV/CD 

selector at this time, otherwise appropriate CEC (Consumer 
Electronics Control) operation will not be guaranteed.

Blu-ray Disc/DVD player, etc.

AV receiver

TV, projector, etc.

DIGITAL AUDIO 
connection 
(OPTICAL)

HDMI 
connection

HDMI 
connection

Change each item in the “HDMI” menu according 
to the following settings:
• HDMI Control(RIHD): On
• Audio Return Channel (ARC): Auto
See details of each setting (

➔ pages 60, 61).

Confirm the settings. 
1. Turn on the power for all connected components. 
2. Turn off the power of the TV, and confirm that the 

power of the connected components is turned off 
automatically with the link operation. 

3. Turn on the power of the Blu-ray Disc/DVD 

player/recorder. 

4. Start playback on the Blu-ray Disc/DVD 

player/recorder, and verify the following:
• The AV receiver automatically turns on, and 

selects the input to which the Blu-ray 
Disc/DVD player/recorder is connected.

• The TV automatically turns on, and selects the 

input to which the AV receiver is connected.

5. Following the operating instructions of the TV, 

select “Use the TV speakers” from the menu 
screen of the TV, and confirm that the audio is 
output from the speakers of the TV, and not from 
the speakers connected to the AV receiver.

6. Select “Use the speakers connected from the AV 

receiver” from the menu screen of the TV, and 
confirm that the audio is output from the speakers 
connected to the AV receiver, and not from the 
TV speakers.

• Perform the above operations when you use the AV receiver 

for the first time, when the settings of each component are 
changed, when the main power of each component is turned 
off, when the power cable is disconnected from the power 
supply, or when there has been a power outage.

Operate with the remote controller.
For buttons that can be operated (

• Audio from DVD-Audio or Super Audio CD may not output 

from the TV speakers. You will be able to output the audio 
from the TV speakers by setting the audio output of the 
DVD player to 2ch PCM. (It may not be possible depending 
on the player models.)

• Even if you set to output audio on the TV speakers, audio 

will be output from the speakers connected to the AV 
receiver when you adjust the volume or switch the input on 
the AV receiver. To output audio from the TV speakers, re-
do the corresponding operations on the TV. 

• In case of an 

p connection with u and u audio 

control compatible components, do not connect the 

u 

cable at the same time.

• On the TV, when you select anything other than the HDMI 

jack to which the AV receiver is connected, the input on the 
AV receiver will be switched to “TV/CD”.

• The AV receiver will automatically power on in conjunction 

when it determines it to be necessary. Even if the AV 

receiver is connected to an 

p compatible TV or 

player/recorder, it will not power on if it is not necessary. It 
may not power on in conjunction when the TV is set to 
output audio from the TV.

• Linked functions with the AV receiver may not work 

depending on the component model connected. In such 
cases, operate the AV receiver directly.