JVC SP-THS55C 사용자 설명서

다운로드
페이지 100
Masterpage:Right+
Filename [TH-R1R3EU_10Subsidiary.fm]
Page 82Monday, 28 March 2005  21:23
SUBSIDIARY SETTINGS
82
1
2
Press selection keys to select 
AINITIAL SET UPB, then press 
3
Press selection keys 
to select 
B, then press 
ENTER for 
confirmation.
NOTE:
When you have 
selected 
AMAGYARORSZÁGB, 
APOLSKAB or AOTHER EASTERNB for the country setting 
(A pg. 17), you cannot use Just Clock function. Skip steps 5 
and 6.
4
Press selection keys to select 
Press selection keys to set the year, then press ENTER.
Repeat the same procedure to set the date and time.
When you set the date, press and hold 
F G to change the date 
by 15 days interval.
When you set the time, press and hold 
F G to change the time 
by 30 minutes interval.
5
Press selection keys to select 
AJUST CLOCKB, then press 
ENTER. Press selection keys to set to the desired mode, then 
press ENTER.
The default setting is 
If you set to 
AOFFB, you can disregard the next step as you 
won’t be able to receive regular clock adjustments.
6
Press selection keys to select 
ATV PROGRAMMEB, then press 
ENTER. Press selection keys to set the channel position to the 
number representing the station transmitting clock setting data, 
then press ENTER.
The unit is preset to receive clock setting and adjustment data 
from the channel selected in this step (step 6).
7
Press SET UP to start the clock operation.
Just Clock (when set to 
AONB) adjusts the unit’s built-in clock 
every hour, except for 23:00, 0:00, 1:00 and 2:00.
Just Clock is not effective when:
^ the unit’s power is on.
^ the unit is in the Timer mode.
^ a difference of more than 3 minutes exists between the built-in 
clock’s time and the actual time.
^ the unit is in the Automatic Satellite Programme Recording 
If Just Clock is set to 
AONB, the unit’s clock is automatically 
adjusted at the start/end of Summer Time.
Just Clock may not function properly depending on the reception 
condition.
Just Clock
The Just Clock function provides accurate time keeping through 
automatic adjustments at regular intervals, by reading data from a 
PDC signal.
The Just Clock option can be set to 
AONB or AOFFB at the Clock Set 
screen. (The default setting is 
IMPORTANT:
If you turn off Just Clock, the accuracy of your unit’s built-in clock 
may be reduced, which could adversely effect timer recording. We 
recommend you to keep Just Clock set to 
AONB. In cases where the 
clock setting data from a PDC signal is incorrect, however, you are 
advised to keep Just Clock set to 
Clock Set
IMPORTANT:
If you performed Auto Set Up (A pg. 17) or Preset Download 
(A pg. 18), without ever having set the clock previously, the 
unit’s built-in clock is also set automatically.
Perform the following steps only if ^
^ Auto Clock Set has not been performed correctly by Auto Set 
Up or Preset Download.
OR
^ you want to change Just Clock setting. (See AJust ClockB in 
the right column)
Turn on the unit.
Turn on the TV and select an input mode such as EXT1.
Set the remote control selector switch to AUDIO.
1
2
3
4
5
6
7
8
9
0
VOL
SAT
TV
AUDIO
SET UP
(FGDE)
ENTER
DVD
Selection Keys
DVD SET UP
FUNCTION SET UP
SELECT WITH [CURSORS] 
THEN PRESS [ENTER]
INITIAL SET UP
AUTO CH SET
MANUAL CH SET
GUIDE PR
CLOCK SET
YEAR
DATE
2005
05/07 SAT
TIME
18:56
JUST CLOCK
OFF
TV PROGRAMME
18
EXIT
OK
SELECT
SET UP
TH-R1R3EU_00.book  Page 82  Monday, March 28, 2005  9:23 PM