JVC SP-THC3C 사용자 설명서

• When you connect speakers other than the supplied ones, use 

speakers of the same speaker impedance (SPEAKER IMPEDANCE) 
indicated near the speaker terminals on the rear of the powered 
subwoofer.

• DO NOT connect more than one speaker to one speaker terminal.

• Be sure to have them installed on the wall by a qualified 

personnel. 

• DO NOT install the satellite speakers on the wall by yourself to 

avoid unexpected damage from their falling off the wall due to 
incorrect installation or weakness in wall structure.

•

Care must be taken in selecting a location for speaker installation 
on a wall. Injury to personnel or damage to equipment may result 
if the speakers installed interfere with daily activities.

Precautions for daily use
• When moving the speakers, do not pull the speaker cords; 

otherwise, the speakers may fall over, causing damage or injury.

• When holding a speaker, always grasp the lower portion.
• Do not lean against the speakers, as the speakers could fall down 

or break, possibly causing an injury. Especially be careful that 
children do not lean against them.

Ω 16Ω

• Connect the black cords to the black (r) terminals.
• Connect the white cords to the (q) terminals 

referring to the table below:

Speaker cord

FRONT SPEAKERS (LEFT)

White

FRONT SPEAKERS (RIGHT)

Red

CENTER SPEAKER

Green

SURROUND SPEAKERS (LEFT)

Blue

SURROUND SPEAKERS (RIGHT)

Gray

Before connecting the speaker cords;
Twist and pull the insulation coat off and remove.

Powered subwoofer

SP-PWC3

Front speakers

SP-THC3F

Surround speakers

SP-THC3S

Center speaker

SP-THC3C

Do not connect the power cord until all other connections have been made.

TH-C3[B]_new.book  Page 8  Thursday, May 19, 2005  1:52 PM