JVC SP-PWA55 사용자 설명서

The VFP (Video Fine Processor) function 
enables you to adjust the picture character 
according to the type of programming, 
picture tone or personal preference.

NOTE
Before you start operation;

• The VFP setting screen disappears if no operations are done for more 

than about 10 seconds. If the setting screen disappears before you 
finish, start from step 1 again.

7 To select a VFP mode

The current VFP settings appear on the TV screen.

Example: When “NORMAL” is selected.

3/2 repeatedly to select 

Each time you press the button, the VFP mode changes as 
follows;
O

O

O

O

O

• NORMAL: Normally select this.
• CINEMA: Suitable for movies.
• USER 1 and USER 2:

You can adjust parameters that affect picture appearance and 
store settings. Go to step 3.

• You cannot adjust the parameters of “NORMAL” and “CINEMA”. 

Press VFP to return to normal screen.

7 To adjust picture appearance manually

3/2 repeatedly to select 

//5 repeatedly to select 

Adjust gradually and confirm picture appearance results are as 
preferred.
• GAMMA (–4 to +4):

Controls brightness of neutral tints while maintaining 
brightness of dark and bright portions.

• BRIGHTNESS (–16 to +16):

Controls screen brightness.

• CONTRAST (–16 to +16):

Controls screen contrast.

• SATURATION (–16 to +16):

Controls screen color depth.

• TINT (–16 to +16):

Controls screen tint.

• SHARPNESS (+0 to +3):

Controls screen sharpness.

• Y DELAY (–2 to +2):

Controls screen color gap.

VFP menu disappears and the following pop-up window 
appears on the TV screen.

//5 repeatedly to change 

The current VFP settings appear again.

To return to the normal screen
Press VFP.

To activate your setting
Press VFP, then press Cursor 

3/2 repeatedly to select “USER 1” 

or “USER 2” that you have changed the parameters.

TH-A85-55[B].book  Page 46  Friday, March 28, 2003  12:01 PM