JVC SP-THA55S 사용자 설명서

Check if you can hear the sounds through all the speakers at 
the equal level.
“TEST TONE” and the corresponding signal indicator starts 
flashing on the display window, and the test tone comes out of 
the speakers in the following order;

] Front left speaker (a) ] Center speaker (b) ] 
Front right speaker (c) ] Surround right speaker 
(i) ] Surround left speaker (g) ] (back to the 
beginning)

Adjust the center speaker and surround speaker levels as much 
as the sound from the front speakers. Use one of the following 
buttons to adjust each speaker level.
• CENTER +/– for the center speaker
• SURR-L +/– for the surround left speaker
• SURR-R +/– for the surround right speaker

7 For DAP modes (

A pg. 33) only

Each time you press the button, the effect level changes as 
follows;

] DSP EFFECT 1 ] DSP EFFECT 2 ] DSP EFFECT 3 
] DSP EFFECT 4 ] DSP EFFECT 5 ] (back to the 
beginning)

As the number increases, the selected mode will be more 
effective. (Normally set the level to “DSP EFFECT 3”.)

• You cannot adjust the center speaker output level for the DAP modes 

and the effect level for All Channel Stereo.

• You can output the test tone in any surround mode, or even when 

surround mode is not activated.

• Speaker output levels whose source signal indicator is lit can be 

adjusted without pressing TEST.

• When selecting DVD as the source, you can also adjust the speaker 

output levels using the choice menu. (

A pg. 53)

TH-A85-55[B]-07Sound.fm  Page 36  Thursday, April 10, 2003  4:03 PM