HP (Hewlett-Packard) 2307890A 사용자 설명서

You may have to optimize your HP Digital Entertainment 
Center video configuration to get the best image on your 
TV/display screen.

You can configure your HP Digital Entertainment Center 
video for dual-display. For instance, you can view the 
screen on your TV and your monitor if both are 
connected. You can also set up additional displays. See 
“Video Out to TV and Monitor” on page 68 to connect 
your TV and monitor.

If you have a multichannel sound system, and the 
broadcast is only 2-channel, you may not hear all the 
sound; you may need to change your audio settings to 
2.0/2.1. Then change the settings back for multichannel 
broadcasts. 

Video software can change periodically; check 
HP Support for updates. Go to
http://www.hp.com/support 
and select your model number.

The HP Digital Entertainment Center can connect more 
than one display device (CRT monitor, flat panel monitor, 
TV, and so on) to the HP Digital Entertainment Center. 

The display defaults to the monitor after turn on if you 
have two displays connected. You must set up the TV 
manually. This is also called “cloning”. The screen 
resolution may change if you switch to two displays. 

Once you have connected a second display and your 
display is set to Single Display mode, you can quickly 
switch between displays by pressing Alt+F5. (Press the Alt 
key and the F5 key on the keyboard at the same time.) 

Each time you press the Alt+F5 key combination, the 
HP Digital Entertainment Center desktop appears on the 
next device. If Alt+F5 does not work, restart the HP Digital 
Entertainment Center and try again.

n