HP (Hewlett-Packard) 2307890A 사용자 설명서

다운로드
페이지 194
162
HP Digital Entertainment Center
Video
Find the description that most closely matches your 
problem, and try the corresponding solution.
Problem
Solution
I am using a TV with 
the HP Digital 
Entertainment 
Center, but I cannot 
see anything.
Check that the correct input source is selected on the TV.
Check that the TV is connected to the HP Digital Entertainment Center. See “Video 
Out to TV” on page 63.
Check that the TV Out image is enabled. See “Configuring Video” on page 140.
I cannot see 
anything on the TV. I 
can hear it, though.
If the Video Output S-video and composite connections are not connected to a TV 
or Video Input when the HP Digital Entertainment Center is turned on, the S-video 
and composite jacks will turn off automatically. You must turn off, by pressing and 
holding down the On/Standby (power) button for 4 seconds, and restart your 
HP Digital Entertainment Center to ensure Video Out connection to your TV or AV 
receiver.
Check your input switches.
My HDTV displays a 
distorted screen 
instead of a blank 
screen (blue or 
dark). The screen 
may be cropped or 
display dark 
borders. 
Refer to http://www.hp.com/support for additional information on 
adjusting the display or updating the drivers. 
If you see a blank screen, you cannot perform recovery or certain activities with 
HDMI. Change your Video Out connection to VGA, recover your system, and 
then reconnect the HDMI connection.
Connect a monitor to your HP Digital Entertainment Center. See “Video Out to TV 
and Monitor” on page 68. 
The HP Digital 
Entertainment Center 
doesn’t recognize 
my digital video 
camera.