HP (Hewlett-Packard) 2307890A 사용자 설명서

Read Instructions before installing or operating your 
HP Digital Entertainment Center.

Follow the instructions provided.

Heed all safety warnings and notes.

Refer to the Warranty and Support Guide for additional 
safety information.

Use the right AC source. The power supply is preset 
for the country/region in which you purchased the 
HP Digital Entertainment Center. If you move to another 
country/region, please make sure you check its voltage 
requirements before plugging your HP Digital 
Entertainment Center into an AC power outlet.

A power cord is included with your HP Digital 
Entertainment Center. If another cord is used, use only 
a power source and connection appropriate for this 
HP Digital Entertainment Center.

Install the system near an AC outlet. The AC power cord 
is your HP Digital Entertainment Center’s main AC 
disconnecting device and must be easily accessible at all 
times. For your safety, the power cord provided with your 
system has a grounded plug. Always use the power cord 
with a properly grounded wall outlet to avoid the risk of 
electric shock.

To reduce the possibility of an electric shock from the 
telephone network, plug your system into the AC outlet 
before connecting it to the DSL/telephone line. Also, 
disconnect the DSL/telephone line before unplugging 
your system from the AC power outlet.

This product has not been evaluated for connection to an 
“IT” power system (an AC distribution system with no 
direct connection to earth, according to IEC 60950).

Ground your system. To reduce the risk of electric 
shock or damage to your equipment, do not disable the 
power cord grounding feature. The grounding plug is an 
important safety feature. Connect the equipment to a 
grounded (earthed) power outlet.

For your safety, be sure that the grounded power outlet 
into which you plug the power cord is easily accessible to 
the operator and is located as close to the equipment as 
possible.

w

w

■

■

■