HP (Hewlett-Packard) 2307890A 사용자 설명서

To connect a standard set-top box (sold separately) and 
an HDTV/SDTV Ant. In input to your HP Digital 
Entertainment Center using a standard set-top box, 
satellite receiver, or digital cable receiver with S-video or 
composite video output, do the following: 

Make sure that a coaxial cable connector from your 
cable TV source (wall) is plugged into the set-top box 
or digital cable receiver In connector.

Connect a video cable:

Choose a video out connector:

■

Coaxial (RF)

■

Video (composite)

■

S-video

Connect the video cable from the set-top 
box or digital cable receiver back panel Video 
Output connector.

Connect the video cable into the HP Digital 
Entertainment Center back panel TV Source 1 In 
connector.

Connect stereo audio cables (skip this step if using 
coaxial [RF]):

From the set-top box or digital cable receiver 
back panel Audio Out right (red) and Audio Out 
left (white) connectors.

Into the HP Digital Entertainment Center back 
panel TV Source 1 In Audio right (red) and Audio 
left (white) connectors.

Connect the coaxial cable from the UHF/VHF 
antenna into the HDTV/SDTV Ant. In HDTV/SDTV 
Ant. In connector on the back of the HP Digital 
Entertainment Center.

Connect the set-top box Infrared Transmitter cable 
(required for signal). See “Infrared Transmitter 
Connection” on page 97.