Denon AVR-1611 사용자 설명서
35
ENGLISH
Basic version
Simple version
Information
Advanced version
Playback
1
Switch
ZONE SELECT
to “ZONE2”.
The remote control unit switches to the
operating mode for ZONE2.
operating mode for ZONE2.
Input source
select buttons
2
Press
AMP
.
3
Press
ZONE/DEVICE ON
to turn
on the ZONE2 power.
The
indicator on the display lights.
• Also, pressing any of input source select
button in standby mode turns on the power.
• When
ZONE/DEVICE OFF
is pressed, ZONE2
turns off.
• Power in ZONE2 can be turned on or off by
pressing
ZONE2 ON/OFF
on the main unit.
4
Press the input source select button.
The audio signal of the selected source is output to ZONE2.
• Turn
SOURCE SELECT
after
pressing
ZONE2 SELECT
on
the main unit to select an input
source.
source.
When power for both MAIN ZONE and ZONE2 is set to ON, power of
the MAIN ZONE only can be turned off. Select “MAIN” in step 1 then
press
the MAIN ZONE only can be turned off. Select “MAIN” in step 1 then
press
ZONE/DEVICE OFF
.
Adjusting the volume
Use
VOL df
to adjust the volume.
G
Adjustable rangeH – – – –80dB – –40dB – 18dB
(When the “Volume Display” (vpage 53) setting is “Relative”)
G
G
Adjustable rangeH
0 – 41 – 99
(When the “Volume Display” (vpage 53) setting is “Absolute”)
• At the time of purchase, “Volume Limit” (vpage 53) is set to
• At the time of purchase, “Volume Limit” (vpage 53) is set to
“–10dB (71)”.
Turn
MASTER VOLUME
after pressing
ZONE2 SELECT
on the main
unit to adjust the sound volume.
Turning off the sound temporarily
Press
MUTE
.
The sound is reduced to the level set at “Mute Level” (vpage 53) in
the menu.
• To cancel, either adjust the volume or press
the menu.
• To cancel, either adjust the volume or press
MUTE
again.
• The setting is canceled when the zone’s power is turned off.
Quick select function
It is also possible to save three settings for ZONE2.
n
Saving the settings
1
Set the items below to the settings
you want to save.
q
Input source (vpage 35)
w
Volume (vpage 35)
2
Switch
ZONE SELECT
to
“ZONE2”.
The remote control unit switches to the
operating mode for ZONE2.
operating mode for ZONE2.
3
Press and hold the desired QUICK SELECT button until
“Memory” appears on the display.
The current settings will be memorized.
G
Quick select defaultsH
Input Source
Volume
QUICK SELECT 1
BD
–40dB
QUICK SELECT 2
SAT/CBL
–40dB
QUICK SELECT 3
DOCK
–40dB
n
Recalling the settings
1
Switch
ZONE SELECT
to
“ZONE2”.
The remote control unit switches to the
operating mode for ZONE2.
operating mode for ZONE2.
2
Press QUICK SELECT at which the
settings you want to call out are
saved.
Naming quick select settings
See “Quick Select Name” (vpage 54).