Epson 5020UB 사용자 설명서
Setting Up the Projector
19
You can connect up to five pieces of equipment at the same time, using any of the
commercially available cables shown below:
commercially available cables shown below:
Note: See page 56 for information on connecting with WirelessHD (PowerLite Home Cinema
5020UBe only).
5020UBe only).
For best results, connect your video equipment to the
HDMI
port, if possible. If your
equipment doesn’t support HDMI, connect it to either the
Component
(for high quality,
component video) or
Video
(for composite video) port.
Note: You need to use a High Speed HDMI cable to use the projector’s 3D features. If you aren’t
sure if your HDMI cable is High Speed, contact your cable manufacturer.
sure if your HDMI cable is High Speed, contact your cable manufacturer.
Port name
Video equipment connection
Computer connection
HDMI1/
HDMI2
HDMI2
Use an HDMI cable (High Speed required for 3D):
Component
Use a component video cable
(with RCA-style connectors):
(with RCA-style connectors):
Connect the cable to the three
component video ports. Match
corresponding colors between the
cable and the ports.
component video ports. Match
corresponding colors between the
cable and the ports.
—
PC
—
Use a Mini D-sub, 15-pin monitor cable
to connect to a computer RGB
(monitor) port:
to connect to a computer RGB
(monitor) port:
Video
Use an RCA video cable:
—