Garmin GPSMAP 296 사용자 설명서

1.   From the Aircraft Profile tab, use the 

ROCKER to highlight 

the 

Current Aircraft and to select the profile you want to 

rename.

2.  Use the 

ROCKER to select the on-screen Rename or Delete 

button, and press 

ENTER. If Rename is selected, use the 

ROCKER and ENTER keys to enter a new tail number.

Weight & Balance may be used during your pre-flight preparations 

to verify the weight and balance conditions for your aircraft. By 

entering the weight and arm values on this page, the GPSMAP 296 

can calculate the total weight, moment, and center of gravity (CG) to 

ensure a safe flight.
Before entering the various figures, you need to determine the 

empty weight of the airplane and the arm (or “station”) for each 

weight entered. These figures should be determined using the pilot’s 

operating handbook for your airplane, which also notes the weight 

limitations and fore/aft CG limits. Compare those figures to the 

values calculated by the GPSMAP 296.

1.  Press 

MENU twice to open the Main Menu. 

2.  Highlight 

Aircraft from the vertical list of tabs.

3.  Press the 

ROCKER right to highlight Weight & Balance. 

4.  Highlight the weight field, and press 

ENTER.

5.  Use the 

ROCKER to enter the weight figure. Press ENTER. 

6.  Change the weight units. Highlight 

lbs, and press ENTER. 

Select 

Kgs, and press ENTER.

7.  Highlight the corresponding 

ARM field, and press ENTER.

8.  Use the 

ROCKER to enter the arm figure. Press ENTER.

9.  Repeat steps 4 through 8 until all figures are entered. The 

calculated moment, weight, and CG figures appear at the 

bottom of the page. Keep in mind that the “Aircraft” (empty 

weight/arm) figures must be entered as a reference to 

calculate a valid moment, weight, and CG.

10. To empty the aircraft, press 

MENU, select Empty Aircraft, 

and press 

ENTER.

A

VIATION

 M

ODE

 P

AGES

 > 

A

IRCRAFT

 I

NFORMATION