Garmin GPSMAP 296 사용자 설명서

The Marine Timer, specifically designed for sail boat racing, 

allows you to easily count up or down specified time increments. 

As common in sail boat racing, there is often a 5-minute warning 

countdown, followed by a 4-minute preparation countdown, and 

finally a one-minute final countdown. You must change the Compass 

Page layout to use the Marine Timer. 

1.  Press 

PAGE repeatedly until the Compass Page appears.

2.  Press 

MENU. 

3.  Use the 

ROCKER to highlight Set up Page Layout, and 

press 

ENTER. 

4.  Highlight 

2 Columns With Timer, and press ENTER. The 

Marine Timer appears in the lower right corner.

1.  Press the 

ROCKER up or down to select the time you want 

to count. Five (5) minutes is the default. 

2.  Press 

ENTER to start the timer. Use the ROCKER during the 

timing to quickly select a different length of time. 

3.  Press 

ENTER to stop timing.

As discussed previously, the timer is set to count down five minutes. 

If you want to change the length of time and the behavior or the 

timer, open the Timers Setup tab in the Main Menu.

1.  Press 

MENU twice to open the Main Menu.

2.  Press the 

ROCKER down to select Setup and then right to 

select the 

Timers sub tab. 

3.  Highlight 

Stop next to Marine, and press ENTER to change 

the timer’s behavior. Highlight the behavior you want, and 

press 

ENTER.

4.  Highlight the time field, press 

ENTER, and then use the 

ROCKER to enter a new time. The maximum time is 60:00 

(minutes: seconds). Press 

ENTER when finished.

M

ARINE

 M

ODE

 P

AGES

 

AND

 F

EATURES

 > 

C

OMPASS

 P

AGE