Honeywell SMV 3000 사용자 설명서

24

SMV 3000 Transmitter User’s Manual 

1/99

The actual piping arrangement will vary depending upon the process
measurement requirements. Process connections can be made to standard
1/4-inch NPT female connections on 2-1/8 inch centers in the double-
ended process heads of the transmitter’s meter body. Or, the connections
in the process heads can be modified to accept 1/2 inch NPT adapter
flange for manifolds on 2, 2-1/8, or 2-1/4 inch centers

The most common type of pipe used is 1/2 inch schedule 40 steel pipe.
Many piping arrangements use a three-valve manifold to connect the
process piping to the transmitter. A manifold makes it easy to install and
remove a transmitter without interrupting the process. It also
accommodates the installation of blow-down valves to clear debris from
pressure lines to the transmitter.

Figure 10 shows a diagram of a typical piping arrangement using a three-
valve manifold and blow-down lines for a flow measurement application.

Figure 10

Typical 3-Valve Manifold and Blow-Down Piping
Arrangement.

Blow-Down 

Valve

3-Valve 
Manifold

To Upstream Tap

To Downstream Tap

To Low Pressure 
Side of Transmitter

To High Pressure 
Side of Transmitter

Blow-Down 
Valve

Blow-Down 
Piping

To Waste

To Waste

Blow-Down 

Piping

21010