Kramer Electronics tp-145 사용자 설명서

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Connecting the TP-145 and the TP-146

Figure 4: Connecting the UXGA/Audio/Data Line Transmitter/Receiver System

To connect the TP-145 and the TP-146 to create a TP transmitter and receiver
system, as illustrated in

1. On the TP-145, connect:

 A UXGA source (for example, the graphics card on a laptop) to the

UXGA IN 15-pin HD (F) connector

 An audio source to the AUDIO IN 3.5mm mini connector, for example,

using a Kramer C-GMA/GMA cable (VGA 15-pin HD (M) +Audio jack
to VGA 15-pin HD (M) +Audio jack)

 An RS-232 cable with a 9-pin D-sub connector at one end to the laptop, and a

3 pin terminal block connector at the other end to the TP-145 RS-232 port

2. On the TP-146, connect:

 The UXGA OUT 15-pin HD (F) connector to the AV display system
 The S/PDIF AUDIO OUT RCA connector to a digital AV Receiver

1 Not supplied. The full list of Kramer cables is available from

. Alternatively, you can connect a

UXGA source to the UXGA IN 15-pin HD (F) connector, and a separate audio source to the AUDIO IN 3.5mm mini connector