Raritan Computer Satellite Radio 전단

Ensure that all video cards used in the installation are set according to a

supported resolution listed in the table shown in Figure 1.

On the Remote Console, turn on the monitor. If necessary, you can fine

tune the video. Press the 

F12

key twice to activate the FiberReach II on-screen

menu (Figure 2). The on-screen menu lets you modify Analog-Digital Clock

and Phase frequency settings, and Digital-Analog Clock frequency settings.

Normal video with the on-screen menu is shown in Figure 3.

Make the following adjustments in the order listed, as necessary:

•

To adjust skewed video (Figure 4), use the < > keys to change the

value of the Dialog-Analog Clock frequency (D-A C number).

•

To adjust video jitter (Figure 5), use the up and down arrow keys

to change the value of the Analog-Digital Phase frequency (A-D

P number).

•

To adjust video noise (Figure 6), use the left and right arrow keys

to change the value of the Analog-Digital Clock frequency (A-D C

number). 

•

To restore A-D and D-A frequency values back to default, press

the 

F9

, 

F10

, and

F11 

keys, respectively. 

When the video quality is satisfactory, press the 

ESC 

key to exit the on-

screen menu. FiberReach II will retain your video settings for each refresh rate.

If through your KVM switch you are connecting to multiple servers con-

figured to different display resolution and refresh rate combinations, you must

repeat Step 3 and stabilize the video for each display setting. However, if you

have multiple servers configured to the same resolution and refresh rate, you

only need to stabilize the video for one server of each resolution and refresh

rate combination.

(Optional) After performing all video adjustments, you may now replace

the CRT monitor at the FiberReach II Receiver with an LCD display if desired.

640x350

X

640x400

X

640x480

X

X

X

X

720x350

X

720x400

X

800x600

X

X

X

X

X

1024x768

X

X

X

X

1152x864*

X

1152x900*

X

X

1280x960*

X

X

1280x1024

X

*FiberReach II supports standard VGA only; if you are using composite sync video, contact
Raritan to purchase a composite-to-VGA converter (Part Number AVGACS).

56Hz

60Hz

66Hz

70Hz

72Hz

75Hz

76Hz

85Hz

Analog-Digital

Clock frequency

Analog-Digital

Phase frequency

Digital-Analog

Clock frequency

Figure 1. Supported Screen Resolution Table

Figure 2. On-Screen Menu

Figure 3. Normal Video with On-Screen Menu

Figure 4. Skewed Video

Figure 5. Video Jitter

Figure 6. Video Noise