DELL E30S 사용자 설명서

Installing the system board

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only 
perform troubleshooting and simple repairs as authorized in your product documentation, or as 
directed by the online or telephone service and support team. Damage due to servicing that is 
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions 
that came with the product.

1.

2.

Keep the #2 Phillips screwdriver ready.

3.

Steps
1.

Unpack the new system board assembly.

CAUTION: Do not lift the system board assembly by holding a memory module, processor, or 
other components.

2. Hold the posts and lower the system board into the chassis.
3. Push the system board toward the back of the chassis such that the ports on the system board align 

with the corresponding slots on the chassis.

4. Install the screws to secure the system board to the chassis.

Next steps

1.

2.

Replace the following:

a.

processors(s) and heat sink(s)

b.

internal USB key (if required)

c.

internal dual SD module

d.

cooling shroud

e.

internal cooling fan

f.

expansion card holder

g.

iDRAC ports card

3.

Reconnect all cables to the system board.

NOTE: Ensure that the cables inside the system are routed along the chassis wall and secured 

using the cable securing bracket.

4.

.

5.

Ensure that you:

a.

Use the Easy Restore feature to restore the service tag. For more information, see 

.

b.

If the service tag is not backed up in the backup flash device, enter the system service tag 

manually. For more information, see 

c.

Update the BIOS and iDRAC versions.

d.

Re-enable the Trusted Platform Module (TPM). For more information, see 

 or 

Related Links

143