DELL E30S 사용자 설명서
CAUTION: Do not remove or install the internal cooling fan by holding the blades.
4. Connect the internal cooling fan power cable to the FAN1 connector on the system board.
Next steps
1.
Install the cooling shroud.
2.
.
Related Links
Removing the external cooling fan
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
2.
3.
Remove the cooling shroud.
Steps
1.
1.
Disconnect the external cooling fan power cable from the system board.
2. Remove the four screws that secure the external cooling fan to the chassis.
3. Lift the external cooling fan to disengage the upper and the lower hooks from the slots on the
3. Lift the external cooling fan to disengage the upper and the lower hooks from the slots on the
chassis wall and remove the cooling fan.
4. Remove the external cooling fan power cable from of the system through the external cooling fan
power cable slot at the back of the chassis.
94