Pfaff 583 사용자 설명서

Installation and commissioning

Fig. 8 - 01

● Loosen screws 1 and 2 and set the desired table-top height

● Tighten screws 1 well.

● Adjust the position of the pedal so that you can operate it comfortably and tighten screw 2.

Installation and commissioning

The machine must only be mounted and commissioned by qualifi ed personnel!

All relevant safety regulations are to be observed!

If the machine is delivered without a table, it must be ensured that the frame

and the table top which you intend to use can hold the weight of the machine

and the motor. It must be ensured that the supporting structure is suffi ciently

sturdy, including during all sewing operations.

.01

Installation

The site where the machine is installed must be provided with suitable connections for the

electric current, see Chapter 3 Specifi cations.

It must also be ensured that the standing surface of the machine site is fi rm and horizontal,

and that suffi cient lighting is provided.

The method of packaging used requires that the table top be lowered for trans-

port. The following is a description of how to adjust the height of the table top.

.01.01

Adjusting the table-top height