Pfaff 483 사용자 설명서

10 PFAFF

6

Feed driving motion

Requirement

With the longest stitch length set and

the needle bar at 0.6 mm past b.d.c. (cylindrical pin in hole “3”; for PFAFF 481)

the needle bar at 0.6 mm past t.d.c. (cylindrical pin in hole “1”; for PFAFF 483)

the feed dog should not move when the reverse-feed control is moved up and down.

● Turn feed driving eccentric     1 (screws 2) according to the requirement.  Make sure that the

notch in the feed driving eccentric is visible.

3

1

2

1