Polycom 3725-70003-009F 사용자 설명서
ReadiVoice Administration & Maintenance Guide
158
Proprietary & Confidential
5
To enable a disabled command, remove the two slashes (//) at the
beginning of the line.
beginning of the line.
6
To change the DTMF key sequence that invokes a command, edit the two
characters to the left of the equal sign for that command.
characters to the left of the equal sign for that command.
7
When you’re finished making changes, save and close the ive.ini file.
8
Reboot the bridges so that they read the updated ive.ini file and load
the new .wav files.
the new .wav files.
9
Set up a test conference and verify that the touchtone commands you
modified work as intended and that the voice prompts are correct.
modified work as intended and that the voice prompts are correct.
10
Make sure your teleconferencing users are aware of the changes.
Detailed Information for Specific Touchtone Features
This section provides more detailed information about the following
touchtone command features and how they can be implemented:
•
touchtone command features and how they can be implemented:
•
•
•
•
•
Lock/Unlock
Conference locking and unlocking can be controlled either with two separate
commands or with a single command that toggles the lock state of the
conference.
The default ive.ini file (
commands or with a single command that toggles the lock state of the
conference.
The default ive.ini file (
on page 157) enables the two-command
option; *4 locks a conference and *5 unlocks it. The relevant lines look like
this:
//*4 = eCMD_LOCK_TOGGLE
*4 = eCMD_CONF_LOCK
*5 = eCMD_CONF_UNLOCK
*4 = eCMD_CONF_LOCK
*5 = eCMD_CONF_UNLOCK
Caution!
Some commands are mutually exclusive. They can be enabled only if the
alternatives are disabled. See “
alternatives are disabled. See “
” for discussions of these commands.