Uniden DCX170 전단

 x If any items are missing or damaged, contact our Customer Care 

 x Need Help? Get answers 24/7 at our website: www.uniden.com.

have a question or problem Customer Care Line*

817-858-2929 or  

800-297-1023

need a part or accessory

Parts Department*

800-554-3988

need special assistance due 

to a disability

Accessibility Help Line 

800-874-9314  

(voice or TTY)

*  During regular business hours, Central Standard Time. Visit our website for detailed 

business hours.

When using your telephone equipment, basic safety precautions should always be 

followed to reduce the risk of fire, electric shock and injury to persons, including the 

following: 

 x This unit is NOT waterproof. DO NOT expose this unit to rain or moisture.

 x Do not use this product near water, for example, near a bath tub, wash bowl, kitchen 

sink or laundry tub, in a wet basement or near a swimming pool. 

 x Avoid using a telephone (other than a cordless type) during an electrical storm. There 

may be a remote risk of electric shock from lightning. 

 x Do not use the telephone to report a gas leak in the vicinity of the leak. 

 x Use only the power cord and batteries indicated in this manual. Do not dispose of bat-

teries in a fire. They may explode. Check with local codes for possible special disposal 

instructions. 

 x Do not place the handset in any charging cradle without the battery installed and the 

battery cover securely in place.

Rechargeable battery 

pack (BT-1021)

AC adapter 

(PS-0035) Battery cover

DCX170 accessory 

handset and 

charger

1. Unpack the handset, battery pack, and battery cover. 

If you need to remove the cover, press in on the 

notch and slide the cover down and off.

2. Line up the battery connector with the jack inside 

the handset; the connector only fits one way. 

3. Push the connector in until it clicks into place; tug gently on the wires 

to make sure the battery is securely connected.

4. Replace the battery cover and slide it into place.

5. Use the AC adapter to connect the power jack on the charger to a 

regular indoor (120V AC) power outlet. 

6. Place the handset in the charger with the display facing forward. If the 

display doesn’t light up, reseat the handset or connect the charger to a 

different outlet.

#

#

This handset is designed for use with Uniden's D1760, D1780, D1785, and 

D1788 bases. For the most up-to-date list of which bases this handset is 

compatible with, see our website.

Place the handset in the base. The display should say 

.

1. On the base, press 

 to open the menus and 

then scroll to 

. Press 

.

2. On the handset, press and hold 

until the handset 

display says 

(about 2 seconds). 

1. On the base, press and hold 

 when the phone is in 

standby (about 5 seconds).

2. On the handset, press and hold 

until the handset 

display says 

(about 2 seconds).

#

test the connection
Pick up the handset and press 

. Make sure you get a dial tone. 

(Press 

 to hang up.)

 xyou don't hear a dial tone

 xthe display says 

 

Making sure the handset is fully 

charged, then trying again.

 x All features and operation for the handset are described in the user's 

guide for the base.

 x User guides for all Uniden phones are available on our website for free 

downloading.

AC adapter
Part number

Input voltage

Output voltage

PS-0035

120V AC, 60 Hz

8V AC @ 300mA

 xUse only the supplied AC adapters.

 xUse the proper adapter for the base & any chargers.

 xDo not place the unit in direct sunlight or subject it to high temperatures.

Battery pack (with normal use)
Part number

Capacity

Talk time

Standby time

Battery life

BT-1021

300mAh, 2.4V DC

about 7 hours

about 7 days

about 1 year

 xReplace the battery when the talk or standby time becomes noticeably reduced. For replace-

ments, call the Parts Department (see the front cover).

 xWhen the battery gets low, the handset beeps and shows a low battery alert; put the handset in 

the cradle for recharging.