Uniden D1760-2 사용자 설명서

If you have trouble with a handset or

if you want to replace one, clear the

registration information from the base

and the handset:

1.  Press & hold

and

at the same

time until you see the System Reset

menu.

2. If you still have the base the handset

is registered to, select Deregister HS,

then select the handset you want

to reset. If you don’t have that base

anymore, select Base Unavailable.

3.  To confirm, select

Yes. The handset

displays Handset not registered.

If you see a “not registered” message on

a handset, you must register it to a base

before using it.

1.  Place the handset in the base;

the display should say Handset 

Registering.

2. Wait until the display says

Registration Complete (about 30

seconds), then pick up the handset

and press

.

3.  If you don’t hear a dial tone or the

display says Registration Failed,

charge the battery completely, then

try again.

Part number

PS-0035

Input voltage

120V AC, 60 Hz

Output voltage 8V AC @ 300mA

xUse only the supplied AC adapters.

xUse the proper adapter for the base &

any chargers.

xDo not place the unit in direct sunlight

or subject it to high temperatures.

Part number

BT-1021

Capacity

300mAh, 2.4V DC

Talk time

about 7 hours

Standby time

about 7 days

Battery life

about 1 year

xReplace the battery when the talk or

standby time becomes noticeably re-

duced. For replacements, call the Parts

Department (see the front cover).

xWhen the battery gets low, the handset

beeps and shows a low battery alert; put

the handset in the cradle for recharg-

ing.

xThis equipment contains a recharge-

able Nickel-Metal-Hydride (Ni-MH)

battery.

xNickel is a chemical known to the state

of California to cause cancer.

xDo not short-circuit the battery.

xThe batteries in this equipment may

explode if disposed of in a fire.

xDo not charge the batteries in any char-

ger other than the one specified in the

owner's manual. Using another charger

may damage the battery or cause it to

explode.

xAs part of our commitment to

protecting our

environment and

conserving natural

resources, Uniden

voluntarily participates

in an RBRC® industry

program to collect and

recycle used Ni-MH batteries within

the United States. Please call

1-800-8-BATTERY for information on

Ni-MH battery recycling in your area.

(RBRC® is a registered trademark of the

Rechargeable Battery Recycling

Corporation.)