Runco CW-95DHD 사용자 설명서
16
CineWall™ Installer/Integrator Manual
PRE
L
IMINAR
Y
Power Requirements
The CineWall requires clean, noise-free AC power. The power cord provided with the
CineWall is 6 feet (1.83 meters) long. In order to use it, the power outlet must be no more
than 48 inches (1.22 meters) from the cable openings on the right side of the chassis. If
the outlet is farther away, substitute a longer power cord for the one provided with the
CineWall; do not use a power strip or extension cord. If you use a substitute power cord,
ensure that it is a UL- or CSA-approved, three-conductor (18 AWG or heavier), shielded
cord rated at 10 amps minimum.
CineWall is 6 feet (1.83 meters) long. In order to use it, the power outlet must be no more
than 48 inches (1.22 meters) from the cable openings on the right side of the chassis. If
the outlet is farther away, substitute a longer power cord for the one provided with the
CineWall; do not use a power strip or extension cord. If you use a substitute power cord,
ensure that it is a UL- or CSA-approved, three-conductor (18 AWG or heavier), shielded
cord rated at 10 amps minimum.
Site Access
The CineWall is shipped in two containers: one for the screen assembly and one for the
chassis and related hardware. The shipping container dimensions are as shown below.
chassis and related hardware. The shipping container dimensions are as shown below.
Ensure that the site has a “carry-in” path with sufficient clearances leading to the
installation location. This is particularly important in corners in stairways, landings and
hallways.
installation location. This is particularly important in corners in stairways, landings and
hallways.
➤
➤
101.13
in. (2,568 mm)
7.5 in.
(190 mm)
61.5 in.
(1,562 mm)
Chassis/Hardware
Screen
86.25 in. (2,191 mm)
30.0 in.
(762 mm)
58.5 in.
(1,486 mm)
A
A 2,000
mm
B 4,000
mm
C 1,900
mm
D 1,200
mm
E 2,400
mm
F 3,700
mm
B
C
D
E
D
F
A
Minimum Stair/Landing Clearances