Sony MZ-M100 사용자 가이드

다운로드
페이지 119
77
The playing time of a 
transferred track is 
different from the time 
that appears on your 
computer monitor.
This is due to a calculation discrepancy between the recorder and the 
computer.
You cannot transfer 
tracks that will fill up 
the remaining 
recording time on the 
disc.
• The minimum recordable time on a disc is normally 2 seconds in SP 
mode, 4 seconds in LP2 mode, and 8 seconds in LP4 mode. When you 
transfer a track from your Windows computer, the recorder needs a 2-
second (or 4- or 8-second) space for a track even if the track is under 2 
seconds (or 4 or 8 seconds) in length. Also, the recorder inserts a 2-
second (or 4 -or 8-second) space in between tracks during transfer 
operation. For this reason, the recorder needs an additional 6 seconds 
(or 12 or 24 seconds) for each track. This reduces the maximum 
recording time for each track by 6 seconds (or 12 or 24 seconds) 
during transfer operation (in MD mode only).
The disc size 
displayed on the 
computer is not the 
same as the disc size 
printed on the disc.
• The difference is due to the use of the binary system to indicate the 
disc size on the computer and the decimal system to express the disc 
size on the disc and other recording media. For details on the disc size, 
see page 66.
You cannot operate the 
recorder.
• You cannot operate the recorder while the recorder is connected to the 
computer.
The lid does not open. • It happens if you disconnect the supplied USB cable in the middle of a 
data transfer, recording, or editing operation on the computer, but 
while the rechargeable battery is missing from the recorder or is 
drained.
, Reconnect the USB cable or insert a fully charged rechargeable 
battery into the recorder, and then press x.
Symptom
Cause/Remedy
Others
Symptom
Cause/Remedy
“Advanced” or 
“Simple” is displayed.
• You attempted to do a menu operation for the first time after 
purchase of the recorder (by pressing the MENU button for 2 
seconds or more).
, Select the Menu mode (page 57).
Some menu items 
cannot be displayed.
• “Menu Mode” is set to “Simple”.
, Set the “Menu Mode” to “Advanced” to display all the menu 
items.