John Deere AC-CP2GS 사용자 설명서
12
Centrifugal Pump Operator's Manual
Service
Note: Perform oil change after first 20 hours of use and then at recommended
intervals. Change engine oil every 25 hours when used under heavy load or
in a high ambient temperatures.
(1) Service more frequently when used in dusty areas.
(2) Should be serviced by authorized dealer unless owner has proper tools and
(2) Should be serviced by authorized dealer unless owner has proper tools and
is mechanically proficient.
CHECK ENGINE OIL
NOTE: All pumps are shipped without engine oil.
1. Stop engine.
2. Place unit on level surface.
3. Remove oil filler cap/dipstick and wipe it clean (B).
4. Insert filler cap/dipstick into oil filler neck, but DO NOT screw it in.
5. Remove dipstick. Proper oil level is at midpoint of dipstick (A). Add oil if necessary
2. Place unit on level surface.
3. Remove oil filler cap/dipstick and wipe it clean (B).
4. Insert filler cap/dipstick into oil filler neck, but DO NOT screw it in.
5. Remove dipstick. Proper oil level is at midpoint of dipstick (A). Add oil if necessary
to bring oil level to top of threads.
6. Install and tighten cap.
First
Month
or 20
hours
Every 3
Months
or 50
hours
Every 6
Months
or 100
hours
Every
Year
or 300
hours
Clean Air Filter
X (1)
Change Air Filter
X
Change Engine Oil
X
X
Clean and Gap Spark Plug
X
Change Spark Plug
X
Clean Sediment Cup
X
Adjust Valve Clearance
X (2)
Clean Fuel tank and filter
X (2)
Check Fuel Tube
X (2)
Clean Detergent Strainer
X
Clean Inlet Water Screen
X
A
B