Multiquip LS600P 사용자 설명서
page 70 — MaYCO LS600p CONCReTe pUMp • OpeRaTiON MaNUaL — Rev. #0 (05/13/13)
APPEnDIx — cOncREtE MIx InfORMAtIOn
CONCReTe Mix iNfORMaTiON
The following information has been extracted from actual testing laboratory reports. The purpose of this printing is only
to help create a better understanding of the importance of uniform gradation and proportioning of materials which affect
pumpability of concrete mixes. These weights and proportions illustrate that when the sieve analysis is ideal, the sand/
rock ratio can be adjusted (65% sand 35% rock) and pumpability should be excellent.
EXAMPLE #1 (A California Test Lab. Report)
JOB:
EXAMPLE #1 (A California Test Lab. Report)
JOB:
Building Foundations (Water Project)
Sacks per cu./yd.
6.5 designed for 2,500 lbs. in 28 days
Gallons per sack
7.1
Washed Sand-#200 wash
1.3
Organic matter
OK
Specifi c gravity (SSD)
Sand-2.58; Pea Gravel-2.60
Sieve aNaLYSiS-peRCeNT paSSiNg
Material
1.5”
1” 3/4” 3/8” #4 #8 #16 #30 #50 #100 #200
W.C.
Sand
100 99.7 79.1 60.4 36.5 14.3 4.0 1.1
Pea
Gravel
100
3.0
%
Comb.
100 66 51 39 23 9 3 1.0
DeSigN fOR ONe YaRD Of CONCReTe (SaTURaTeD & SURfaCe DRY):
Absolute volume of aggregate in one cu. yard:
17.78 cu. ft.
Specifi c gravity of aggregates in one cu. yard:
2.58
Weight of aggregates in one cu. yard batch:
2850 lbs.
%
BATCH
SpeC. gRaviTY
aBS. vOL.
W.C.
Sand 65
1800
2.58
11.56
PEA
GRAVEL
35
1000
2.60
6.22
WATER 46 gal.
1
CEMENT 6.5 sk.
611
TOTAL
27.00
ADMIXTURE: None
SLUMP
SLUMP
4”
REMARKS
This mix is designed for pumping
NOTE:
Due to the availability of well-graded sand as shown in the above sieve analysis,
this mix pumped very successfully.