Sony MDS-JB980 사용자 설명서
32
GB
3
Enter a character using letter/number
buttons.
buttons.
If you have selected upper cases or
lower cases
lower cases
1 Press the corresponding letter/number
button repeatedly until the character to
be entered flashes.
Or, press the button once and press
be entered flashes.
Or, press the button once and press
./>
repeatedly.
To select the following symbols, press
the number 1 button repeatedly.
’ – / , . ( ) : ! ?
In addition, when the symbols above
appear in the display, press
the number 1 button repeatedly.
’ – / , . ( ) : ! ?
In addition, when the symbols above
appear in the display, press
./>
repeatedly to display the following
symbols.
& + < > _ = ” ; # $ % @
symbols.
& + < > _ = ” ; # $ % @
*
`
2 Press
M
.
The flashing character is entered and
lights continuously and the cursor shifts
to the right.
lights continuously and the cursor shifts
to the right.
If you have selected numbers
Press the corresponding number button.
The number is entered and the cursor shifts
to the right.
The number is entered and the cursor shifts
to the right.
4
To change a character
Press m/M repeatedly until the
character to be changed flashes, press
CLEAR to erase the character, then repeat
steps 2 and 3.
character to be changed flashes, press
CLEAR to erase the character, then repeat
steps 2 and 3.
5
Press YES.
The whole name appears in the display,
followed by “Complete!.”
followed by “Complete!.”
Renaming a track or an MD
1
Press NAME EDIT/SELECT on the
remote depending on what you want to
rename:
remote depending on what you want to
rename:
A track or disc name appears in the display.
2
Press CLEAR until the selected name is
erased completely.
erased completely.
3
Do steps 4 to 7 of “Naming a track or an
MD using the controls on the deck” on
page 31 or steps 2 to 4 of “Naming a
track or an MD using the remote” on
page 31.
MD using the controls on the deck” on
page 31 or steps 2 to 4 of “Naming a
track or an MD using the remote” on
page 31.
4
Press YES.
The whole name appears in the display,
followed by “Complete!.”
followed by “Complete!.”
Erasing a track or disc name
Use this function to erase the name of a track or
disc.
disc.
1
While the deck is stopped, playing,
recording, or paused, press MENU/NO.
recording, or paused, press MENU/NO.
“Edit Menu” appears in the display.
2
Turn AMS (or press
./>
repeatedly) until “Nm Erase?” appears,
then press AMS or YES.
then press AMS or YES.
3
Turn AMS (or press
./>
repeatedly) until the number of the track
(when erasing the track name) or “Disc”
(when erasing the disc name) flashes,
then press AMS or YES.
(when erasing the track name) or “Disc”
(when erasing the disc name) flashes,
then press AMS or YES.
“Complete!” appears.
To rename
Press while
A track
The track number is displayed
The MD
The deck is stopped with total
number of tracks (or groups when
the Group function is on)
displayed
number of tracks (or groups when
the Group function is on)
displayed