Sweex 5 Port Switch 10/100 Mbps SW001 매뉴얼

3

With regard to the 5-port models, the mains supply adaptor connection is located at the rear. Connect the main supply adaptor and subsequently
connect the PCs or other peripherals you would like to include in your network to a free port at the rear. 

The front or top of the switch contains a number of LEDs indicating the status of the switch. These LEDs have the following functions:

Green

On

This LED will be lit when connected to the power supply.

-

Off

This LED will be off whilst not connected to the power supply

Green

On

The port is connected to a computer

Green

Blinking

This port is busy sending or receiving data

All Sweex Fast Ethernet Switch models dispose of so-called MDI-X ports. This means that you can connect all types of devices including computers,
print servers, hubs and other switches using standard UTP or STP cables.

Sweex has published an extensive explanation on its website detailing the basic set-up of a network. This set-up describes multiple situations. Go
to www.sweex.com under the product you purchased and then select the header "manual". Subsequently, click the link ending in man_all_network. 

All articles that are carried under the name Sweex have a 3-year term of guarantee. Only the Sweex Digital photo and video cameras have a 
2-year term of guarantee. We do not provide support or warranty for the supplied software or (rechargeable) batteries.

Settlement of guarantee only takes place via the dealer where you have purchased the product in question.

SW001_3_man_inside  26-08-2005  09:30  Pagina 3