Sony Ericsson XR-C7500RX 사용자 설명서

15

1. Clean the following parts with a denatured-alcohol-moistened

swab:

playback head

pinch roller

rubber belt

capstan

idler

2. Demagnetize the playback head with a head demagnetizer.
3. Do not use a magnetized screwdriver for the adjustments.
4. After the adjustments, apply suitable locking compound to the

parts adjusted.

5. The adjustments should be performed with the power supply

voltage unless otherwise noted.

Mode

Torque Meter

Meter Reading

 2.95 – 6.37 mN•m

Forward

CQ-102C

(30 – 65 g•cm)

(0.42 – 0.90 oz•inch)

Forward

0.05 – 0.44 mN•m

CQ-102C

(0.5 – 4.5g•cm)

Back Tension

(0.01 – 0.06 oz•inch)

2.95 – 6.37 mN•m

Reverse

CQ-102RC

(30 – 65 g•cm)

(0.42 – 0.90 oz•inch)

Reverse

0.05 – 0.44 mN•m

CQ-102RC

(0.5 – 4.5g•cm)

Back Tension

(0.01 – 0.06 oz•inch)

5.89 – 19.61 mN•m

FF, REW

CQ-201B

(60 – 200 g•cm)

(0.83 – 2.78 oz•inch)

Mode

Tension Meter

Meter Reading

more than 8.83 mN•m

Forward

CQ-403A

(more than 90 g)

(more than 3.18 oz)

more than 8.83 mN•m

Reverse

CQ-403R

(more than 90 g)

(more than 3.18 oz)

This set has the test mode function.

<Set the Test Mode>
1. Turn ON the regulated power supply. (The clock is displayed)

 Press the 

[OFF]

 button, if the clock is not displayed.

2. Press the preset 

[4]

 button.

3. Press the preset 

[5]

 button.

4. Press the preset 

[1]

 button for more than two seconds.

5. Then the display indicates all lights, the test mode is set.

<Release the Test mode>
1. Press the 

[OFF]

 button.