JVC KD-DV4402 사용자 설명서

다운로드
페이지 147
ENGLISH
12
  Activating/deactivating TA/PTY Standby Reception 
TA Standby Reception
Indicator
PTY Standby Reception
Indicator
Press 
 to activate.
See page 25.
The unit temporarily will switch to Traffic 
Announcement (TA), if available, from any 
source other than AM.
The volume changes to the preset TA 
volume level if the current level is lower 
than the preset level (see page 25).
Lights up
The unit temporarily will switch to your 
favorite PTY programme from any source 
other than AM.
Lights up
Not yet activated. Tune in to another 
station providing the RDS signals.
Flashes
Not yet activated. Tune in to another 
station providing the RDS signals.
Flashes
Press 
 to deactivate.
Goes off
Select “OFF” for the PTY code (see page 25) 
to deactivate.
Goes off
When driving in an area where FM reception is not 
sufficient enough, this unit automatically tunes in to 
another FM RDS station of the same network, possibly 
broadcasting the same programme with stronger 
signals (see the illustration on the right).
When shipped from the factory, Network-Tracking 
Reception is activated.
To change the Network-Tracking Reception 
setting,
 see “AF-REG” on page 25.
  Tracing the same programme—Network-Tracking Reception 
Programme A broadcasting on different frequency 
areas (01 – 05)
  Automatic station selection—Programme Search 
Usually when you press the number buttons, the preset station is tuned in.
If the signals from the FM RDS preset station are not sufficient for good reception, this unit, using the AF data, tunes 
in to another frequency broadcasting the same programme as the original preset station is broadcasting.
•  The unit takes some time to tune in to another station using programme search.
•  See also page 25.
EN06-13_DV4402_001A_f.indd   12
EN06-13_DV4402_001A_f.indd   12
12/12/07   11:56:46 AM
12/12/07   11:56:46 AM