JVC XM-EX90 사용자 설명서
25
XM-EX90
Radio or tape recording
The analog input from an analog source component can be recorded on an MD as described below.
If you are operating the remote control unit, use the MD CONTROL buttons on the normal control
button panel.
If you are operating the remote control unit, use the MD CONTROL buttons on the normal control
button panel.
1 Load a recordable MD (Mini Disc).
2 Prepare the amplifier/tuner or cassette deck.
With the amplifier/tuner, receive the station to be
recorded.
With the cassette deck, load the tape to be recorded.
Switch the reverse mode on if you want to record the
playback of both sides.
recorded.
With the cassette deck, load the tape to be recorded.
Switch the reverse mode on if you want to record the
playback of both sides.
3 Press REC PAUSE.
The MD recorder enters record-pause mode.
4 Press INPUT to select the analog input.
Press so that "ANALOG IN" appears on the display (see
page 21).
page 21).
5 Press
4 or ¢ to adjust the input level.
See “To adjust the analog input level” on page 22.)
When recording from the cassette deck, start playing
the tape before proceeding to the input level control.
After the input level control, rewind tape to the
beginning of the music to be recorded.
When recording from the cassette deck, start playing
the tape before proceeding to the input level control.
After the input level control, rewind tape to the
beginning of the music to be recorded.
6 Press
‹/8.
Recording starts.
• If you are operating the remote control unit, press
£.
• When recording radio broadcast from the tuner, it is
convenient for later editing to record track markings
manually during recording (see page 23).
manually during recording (see page 23).
• When recording from the cassette deck, go to step 7.
7 With the cassette deck, press
¤ or ‹.
Main unit
Remote control unit
Main unit
Remote control unit
CD REC
REC PAUSE
REC LEVEL
/CANCEL
EN14-25.XM-EX90[J]/1
98.6.4, 0:06 PM
25