JVC KD-AR800 사용자 설명서

ENGLISH

Repeat the above procedure to store
other stations into other preset
numbers.

Notes:
• A previously preset station is erased when a new

station is stored in the same preset number.

• Preset stations are erased when the power supply to

the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset
the stations again.

Tuning in to a preset station

You can easily tune in to a preset station.
Remember that you must store stations first. If
you have not stored them yet, see “Storing
stations in memory” on pages 11 and 12.

Select the band (FM1 – 3, AM).

Each time you press the
button, the band changes as
follows:

Select the number (1 – 6) for the
preset station you want.

Note:
You can also use the

5 (up) or ∞ (down) button on

the unit to select the next or previous preset stations.
Each time you press the

5 (up) or ∞ (down) button,

the next or previous preset station is tuned in.

Manual preset

You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.

Ex.: Storing FM station of 92.5 MHz into the

preset number 1 of the FM1 band.

Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).

Each time you press the
button, the band changes as
follows:

Tune in to a station (in this example,
of 92.5 MHz).

Press and hold the number button
(in this example, 1) for more than
2 seconds.

To tune in to stations of
higher frequencies

To tune in to stations of lower frequencies

FM 1

(F1)

FM 2

(F2)

FM 3

(F3)

A M

(A1)