Marantz CDR632 사용자 설명서

If one of the following messages should appear, press 
the 

 (stop) button and then deal with the cause of 

the error. If you are still unable to resolve the prob-
lem, please contact service center nearby.

Cannot record. Either erase the contents of the 
disc (for a CD-RW), or use a different recordable 
disc.

There is a problem with the disc. Use a different 
disc.

Recording is not possible because there is no 
more recordable time or recordable track on the 
disc.

You have reached the maximum number of char-
acters.

After editing text, you attempted to open the tray 
without finalizing. If you wish to proceed (and 
discard the text you entered), press the 

 

(Open/Close) button once again.

There is a problem with the CD-RW drive.

No digital unit is connected to the DIGITAL IN 
jack (or the power of the connected digital unit is 
turned off). Check the connection and power of 
your digital unit.

The signal being received at the DIGITAL IN jack 
is not an audio signal.

An error occurred while erasing.

The sampling frequency of the digital input is not 
44.1 kHz. Please turn the SRC on.

Nothing has been programmed.

You have already programmed 99 songs.

This format cannot be read on the unit.

The editing operation cannot be executed due to 
operational restrictions.

The menu or other item cannot be selected 
because it is prohibited.

The track cannot be incremented because 
M_TR_INCR is OFF.

An error occurred while recording. Please re-
record.

There is no directory that contains a file.

Failed to playback an MP3 file.

An unrecorded disc is inserted.

An operation such as finalize or erase has been 
completed.

Calibration is being performed to match the char-
acteristics of the disc being used so that it can be 
recorded optimally.

The disc is being repaired.

The recorded content is being written to the disc.

TOC data is being read.