Jacuzzi F258000 사용자 설명서
1
Important
The bath must be installed according to installation instructions (F258000) for the Verona™ whirlpool bath.
Follow the instructions to ensure that proper framing has been provided to support the J-Corner Shower Tower.
Finishing materials must be waterproof and sealed so that spray and condensation do not cause moisture dam-
age.
Follow the instructions to ensure that proper framing has been provided to support the J-Corner Shower Tower.
Finishing materials must be waterproof and sealed so that spray and condensation do not cause moisture dam-
age.
NOTE: The J-Corner Shower Tower has been partially pre-assembled for your convenience during
installation. The installer must still follow the instructions to ensure proper installation of the tower and
components (see page 11). We recommend that two persons perform this installation.
installation. The installer must still follow the instructions to ensure proper installation of the tower and
components (see page 11). We recommend that two persons perform this installation.
Contents
Exploded View of J-Corner Shower Tower _________________________________________________
2
Shower Tower Hardware Identification Chart __________________________________________________
4
Tower Assembly _______________________________________________________________________
6
Water Lines to Mixer/Diverter Valve _________________________________________________________
8
Attaching Diverter Valve to Shower Wall _____________________________________________________
8
Tower Installation ______________________________________________________________________
10
Tower Disassembly ______________________________________________________________________
11
Placing Tower __________________________________________________________________________
12
Fixed Panel Assembly ____________________________________________________________________
13
Mounting Top Ring and Wall Bracket to Tower _________________________________________________
15
Fixed Glass Frame End Attachment _________________________________________________________
17
Sealing and Trimming ____________________________________________________________________
18
Attaching Face Plate _____________________________________________________________________
19
Handle Installation and Operation ___________________________________________________________
19
Tools Required
1.
Drill.
2.
Drill bits: 3/32", 1/8", 3/16", 5/16" and 9/32".
3.
Flat blade screw driver, No. 1.
4.
Phillips type blade screw driver, No. 2.
5.
5/16" or 8 mm deep socket or nut driver.
6.
Caulking gun.
7.
Sealant (silicone).
8.
Adjustable wrenches (small and medium).
9.
Allen wrenches: 1.5 mm, 2.5 mm, 3 mm and 5/64".
10. Step ladder.