Optimus 4301-3838-0 사용자 설명서

6

Important: Do not cut these wires. If
you cut any wire, you cannot obtain a
refund or exchange on this product.
However, your local RadioShack
store 

will

 provide warranty service if

you cut a wire and find the product is
defective.

You might need additional wire, de-
pending on your individual auto-
sound system, to complete the
connections. Your local RadioShack
store carries a full line of wire and
wire management accessories.

• For added safety and to protect

your stereo, disconnect the
cable from your vehicle’s nega-
tive (–) battery terminal before
you begin.

• Be sure your speakers can han-

dle 8 watts of power (4 watts per
channel). Each speaker must
have an impedance of at least 4
ohms. Your local RadioShack
store carries a full line of speak-
ers.

• You must connect the 

, 

, and

 wires first, then

make all other connections as

described in the following sec-
tions before you plug the har-
ness with the 14-pin connector
into the stereo. If you do not
make connections in the order
shown, damage to the stereo is
possible if any wire connections
are made incorrectly.

• You must connect a separate

wire to each speaker terminal as
described in the following proce-
dure. Do not use a common wire
or chassis ground for any
speaker connection.

Note: The wires in the wiring har-
ness have the following colors and
labels.

12-2114.fm  Page 6  Wednesday, July 14, 1999  12:35 PM