Optimus SCR-100 사용자 설명서
7
Cautions:
You must use a Class 2 power source
that supplies 3V AC and delivers at
least 300 mA. Its center tip must be set
that supplies 3V AC and delivers at
least 300 mA. Its center tip must be set
to positive and its plug must fit the SCR-100's
DC 3V jack. Using an adapter that does not
meet these specifications could damage the
SCR-100 or the adapter.
DC 3V jack. Using an adapter that does not
meet these specifications could damage the
SCR-100 or the adapter.
• Always connect the AC adapter to the SCR-100
before you connect it to AC power. When you
finish, disconnect the adapter from AC power
before you disconnect it from the SCR-100.
finish, disconnect the adapter from AC power
before you disconnect it from the SCR-100.
Follow these steps to power the SCR-100 from stan-
dard AC power.
dard AC power.
1. Set the adapter’s voltage switch to 3V.
!
14-1252.fm Page 7 Thursday, October 28, 1999 3:27 PM