Sony PCM-R500 사용자 설명서
Getting Started
3-
859
-
278
-12(1)
6
EN
Copy information during recording
•
Copy information that is recorded on tape during
recording varies according to the input connector
used and the signal format, as shown in the table
below.
recording varies according to the input connector
used and the signal format, as shown in the table
below.
•
In the case of AES/EBU and the IEC-958 for
broadcasting studio use, the digital signal carries no
copy information.
broadcasting studio use, the digital signal carries no
copy information.
•
As for the IEC-958 for consumer use, three types of
copy information exists: copying possible, first-
generation copy permitted, and copying prohibited
(Serial Copy Management System).
copy information exists: copying possible, first-
generation copy permitted, and copying prohibited
(Serial Copy Management System).
Digital Interface
Digital input and output connectors
•
The following table shows signal formats that
correspond to the input and output connectors on
the deck.
correspond to the input and output connectors on
the deck.
•
The DIGITAL COAXIAL IN connector accepts not
only the consumer version of the IEC-958
international digital audio interface standard, but
also the broadcasting studio version of the IEC-958
standard used by such DAT decks as the PCM-2300,
PCM-2700 or PCM-2700A.
only the consumer version of the IEC-958
international digital audio interface standard, but
also the broadcasting studio version of the IEC-958
standard used by such DAT decks as the PCM-2300,
PCM-2700 or PCM-2700A.
Type
Input connector
Output connector
AES/EBU format
IEC-958 for
consumer use
consumer use
IEC-958 for
broadcasting studio use
broadcasting studio use
DIGITAL
AES/EBU
AES/EBU
DIGITAL
COAXIAL
COAXIAL
IEC-958 for consumer
use
use
AES/EBU format
Input
connector
connector
Signal
format
format
Copy
information
carried by
digital signal
information
carried by
digital signal
Recording
capability
on this
deck
capability
on this
deck
Copy
information
recorded on
tape
information
recorded on
tape
DIGITAL
AES/EBU
AES/EBU
AES/EBU
None
Possible
Possible
None
IEC-958 for
broadcasting
studio use
broadcasting
studio use
Determined
by menu
setting (pages
24 and 25)
by menu
setting (pages
24 and 25)
Determined
by menu
setting (pages
24 and 25)
by menu
setting (pages
24 and 25)
Other connections
To connect a switch box through the REMOTE 1
connector
connector
Refer to “Remote Control Function Using a Parallel Remote
Connector” on page 28.
Connector” on page 28.
To connect the optional remote through the REMOTE 2
connector
connector
Refer to “The Optional Remote RM-D750” on page 26.
Connecting AC power cord
Connect the AC power cord (supplied) to the AC IN
socket on the rear panel and connect the plug on the
other end to a wall outlet.
socket on the rear panel and connect the plug on the
other end to a wall outlet.
Where do I go next?
Now you’re ready to use your deck.
For basic operations, go to pages 9 to 11; for advanced
operations, go to pages after 12.
For basic operations, go to pages 9 to 11; for advanced
operations, go to pages after 12.
DIGITAL
COAXIAL
COAXIAL
Permitted
Possible
Permitted
(ID 6:00)
(ID 6:00)
IEC-958 for
consumer use
consumer use
First-
generation
only
generation
only
Possible
Prohibited
(ID 6:10)
(ID 6:10)
ANALOG
(BALANCE/
UNBALANCE)
(BALANCE/
UNBALANCE)
—
—
Possible
Possible
Prohibited
Prohibited
(ID 6:10)
(ID 6:10)
Determined by
menu setting
(page 24)
menu setting
(page 24)