Yamaha pmn 사용자 설명서

Select “TEST DOLBY SUR.” to match the output levels of the center, rear center and left and right rear speakers to the left and right main
speakers.

“TEST DOLBY SUR.” appears on the video monitor and front
panel display.

The test tone is produced from the left main speaker, center
speaker, right main speaker, right rear speaker, rear center
speaker and left rear speaker in order. The tone is produced for
2.5 seconds each time. You can also select the speaker to be
adjusted by tapping 

 or 

.

• Speakers whose settings are set to “NONE” in “1 SPEAKER

SET” (except for “1A CENTER SP”) on the SET MENU will
be skipped and no test tone will be output.

• You can also enter the TEST DSP SUR. mode by tapping

 on the SET MENU control panel. However, the

adjustment cannot be made by tapping 

, 

,   and 

on the SET MENU control panel.

• If the test tone cannot be heard, turn down the volume, set

this unit in the standby mode and check the speaker connec-
tions.

LEFT

TEST DOLBY SUR.

TEST DOLBY SUR.

LEFT

RL

FR

RR

FL

L

C

RC

R

Tap   or   repeatedly to adjust the output level of
the effect speakers so that the output level coming
from each speaker is the same.
Each speaker level can be adjusted in the range of –10 to +10
dB.
While adjusting, the test tone is heard from the selected
speaker.

• If “1A CENTER SP” on the SET MENU is set to “NONE”,

the center channel sound is automatically output from the left
and right main speakers.

• If “1D REAR CT SP” on the SET MENU is set to “NONE”,

the output level of the rear center speaker cannot be adjusted
in step 3.

• Main L/R speaker level cannot be adjusted by itself. Use

VOLUME to adjust the main volume.

Tap 

 again to stop the test tone and the DSP program

name appears on the front panel display and the video monitor.

• The tonal quality of the speakers can be adjusted using the “4

CENTER GEQ”, “5 REAR CT GEQ”, and “6 CINEMA EQ”
items in the SET MENU (see pages __ to __).

• You can increase the output levels of the effect channels (left rear,

right rear, rear renter and center) to +10 dB. If the output level of
the center, rear, and rear center speakers is lower than that from
the main speakers even after you have increased the sound volume
level of the center, rear, and rear center speakers up to +10 dB, set
the “1G MAIN LEVEL” item in the SET MENU to “–10dB”.
Setting the “1G MAIN LEVEL” item to this setting decreases the
main speaker volume level to about one-third the normal level.
After you set the “1G MAIN LEVEL” item in the SET MENU to
“–10dB”, adjust the levels for the center, rear, and rear center
speakers again.

• The adjustment of output levels of the center speaker, and left and

right rear speakers is also effective to the speaker output level
during the playback of the source connected to 6CH INPUT jacks.