Yamaha RX-V561 사용자 설명서

■ Editing sound fields parameters

You can enjoy good quality sound with the factory preset 
parameters. Although you do not have to change the initial 
settings, you can change some of the parameters to better 
suit the input source or your listening room.

While listening to a source, press D

AMP 

Gk / n to select the desired 

Press Gl / h to change the parameter 
value.

You cannot change parameter values when “MEMORY GUARD” 
in “OPTION MENU” is set to “ON” (see page 55).

y
Initial settings are indicated in bold under each parameter.

DSP LEVEL

Function:

Adjusts the effect level.

Choices:

MIN, MID, MAX

PANORAMA

Function:

Sends stereo signals to the surround 
speakers as well as the front speakers for 
a wraparound effect.

Choices:

OFF, ON

DIMENSION

Function:

Gradually adjusts the sound field either 
towards the front or towards the rear.

Control range: –3 (towards the rear) to +3 (towards the 

front), initial setting is STD (standard).

CT WIDTH

Function:

Adjusts the center image from all three 
front speakers to varying degrees. A 
larger value adjusts the center image 
towards the front left and right speakers.

Control range: 0 (center channel sound is output only 

from center speaker) to 7 (center channel 
sound is output only from front left and 
right speakers), initial setting is 3.

Effect level
Function:

Adjusts the effect level.

Choices:

LOW, HIGH