Yamaha RX-A2010 사용자 설명서

En

■ 

Selects whether to automatically adjust the CINEMA DSP effect level in conjunction with 
volume adjustments.

Configures the video output settings.

■ 

Enables/disables the video conversion (p.149) between the analog video jacks 
(COMPONENT VIDEO, S VIDEO and VIDEO).

• This function works only when “Monitor Out Assign” (p.119) is set to “Main”.

• This unit does not convert 480-line and 576-line video signals interchangeably.

• 480p/576p-, 1080i- and 720p-resolution video signals cannot be output from the S VIDEO and VIDEO 

jacks (p.149).

■ 

Enables/disables the video signal processing (resolution, aspect ratio and video 
adjustments).

❑ Resolution

Selects a resolution to output HDMI video signals when “Processing” is set to “On”.

• If you need to select a resolution that is not supported by your TV, set “MONITOR CHECK” (p.126) in the 

“ADVANCED SETUP” menu to “SKIP” and try again. (Note that output videos may not be displayed on your 
TV normally.)

❑ Aspect

Selects an aspect ratio to output HDMI video signals when “Processing” is set to “On”.

• This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i or 1080p 

signals.

Off

Does not adjust the effect level automatically.

On (default)

Adjusts the effect level automatically. Also, the effect level is corrected 
according to the measurement results of “Auto Setup” (p.44).

Off

Disables the video conversion between the analog video jacks.

On (default)

Enables the video conversion between the analog video jacks.
Converted video signals are output from the MONITOR OUT jacks only.

Off (default)

Disables the video signal processing.

On

Enables the video signal processing.
Configure the settings in “Resolution”, “Aspect” and “Adjustment”.

Through

Does not convert the resolution.

Auto (default)

Selects a resolution automatically in accordance with TV 
resolution.

480p/576p, 720p, 1080i, 
1080p

Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)

Through (default)

Does not convert the aspect ratio.

16:9 Normal

Outputs 4:3 video signals to a 16:9 TV with black bands on either 
side of the screen.

Smart Zoom

Adjusts 4:3 video signals to fit a 16:9 TV. (The edges of video 
images may be distorted.)