Kenwood VR-9080 사용자 설명서
23
EN
Preparing for surround sound
Setting up the speakers manually
(MANUAL SETUP)
(MANUAL SETUP)
1
Select a speaker system.
If you have THX certified speakers, please set them to NML/THX.
1 Press the 5/∞ keys or MULTI @/# keys to select the “MANUAL
SETUP” and press the MEMORY/ENTER key or the ENTER
key.
key.
2 Select the “SP SETUP” and press the MEMORY/ENTER key
or the ENTER key again so that the subwoofer setting indication
“SUBW ON” appears.
“SUBW ON” appears.
L
SL
SB
SR
C
R
SP
MUTE
A B
CLIP
SW
LFE
STEREO
3 Use the MULTI CONTROL knob or MULTI %/fi keys to select
the appropriate subwoofer setting.
1 SUBW ON : A Subwoofer is connected to the receiver.
2 SUBW OFF : A Subwoofer is not connected to the receiver.
2 SUBW OFF : A Subwoofer is not connected to the receiver.
• The initial setting is “SUBW ON”.
• When Subwoofer output sound is required, select “FRNT NML/
• When Subwoofer output sound is required, select “FRNT NML/
THX”, or select both “FRNT LARGE” and “SW RE-MIX ON”.
4 Press the 5 key or MULTI # key to accept the setting.
• When the setting “SUBW ON” is selected, the front speakers
setting indication “FRNT” appears.
• When the setting “SUBW OFF” is selected, the Front Speakers
are automatically set to “FRNT LARGE” and the procedure skips
to step
to step
7.
L
SL
SB
SR
C
R
SP
MUTE
A B
CLIP
SW
LFE
STEREO
5 Use the MULTI CONTROL knob or MULTI %/fi keys to select
the appropriate front speakers setting.
1 FRNT NML/THX
: Average size Front Speakers are con-
nected to the receiver.
2 FRNT LARGE
: Large size Front Speakers are connected
to the receiver.
6 Press the 5 key or MULTI # key to accept the setting.
• The Center Speaker setting indication “CNTR” appears.
7 Use the MULTI CONTROL knob or MULTI %/fi keys to select
the appropriate Center Speaker setting.
If you selected “FRNT LARGE” as the Front Speakers setting,
1 CNTR NML/THX : An average size Center Speaker is con-
nected to the receiver.
2 CNTR LARGE
: A large size Center Speaker is connected
to the receiver.
3 CNTR OFF
: A Center Speaker is not connected to the
receiver.
If you selected “FRNT NML/THX” as the Front Speakers
setting,
setting,
1 CNTR NML/THX : An average size Center Speaker is
connected to the receiver.
2 CNTR OFF
: A Center Speaker is not connected to the
receiver.
8 Press the 5 key or MULTI # key again to accept the setting.
• The Surround Speaker setting indication “SURR” appears.
W06 : No Spk S
Surround speakers are not connected.
Connect a pair of Surround speakers if you have a set.
If there are no Surround speakers, no need to connect it.
W07 : No Spk SB
Surround Back speakers are not connected.
Connect a pair of Surround Back speakers if you have a set.
If there are no Surround Back speakers, no need to connect it.
W08 : No SpkSBR
Surround Back Right speaker is not connected.
Connect a Surround Back Right speaker if you have one.
If there is no Surround Back Right speaker, no need to connect it.
Continued to next page.
*5557/20-26/EN
05.7.16, 1:24 PM
23