JVC RX-5060B 사용자 설명서
32
English
To change the transmittable signals for
operating another manufacturer’s DVD player
operating another manufacturer’s DVD player
1 Press and hold STANDBY/ON
DVD.
2 Press DVD.
3 Enter a manufacturer’s code using buttons 1 – 9,
and 0.
Manufacturer
Codes
JVC
01*
Panasonic
02
Philips
04
Pioneer
03
Sony
05
Toshiba
06
Yamaha
07
* “01” is the initial setting.
4 Release STANDBY/ON
DVD.
Now you can perform the following operations on the DVD
player:
player:
STANDBY/ON
DVD:
Turn on and off the DVD player.
After pressing DVD, you can perform the following operations
on the DVD player:
on the DVD player:
3:
Start playing.
4:
Return to the beginning of the current (or previous)
chapter (or fast reverse for some models).
chapter (or fast reverse for some models).
¢:
Skip to the beginning of the next chapter (or fast
forward for some models).
forward for some models).
7:
Stop playing.
8:
Pause playing. To resume, press
3.
After pressing DVD, these buttons
can be used for the DVD menu
operations.
can be used for the DVD menu
operations.
Note:
For detailed menu operations, refer to
the instructions supplied with the discs
or the DVD player.
the instructions supplied with the discs
or the DVD player.
5 Try to operate your DVD player by pressing
STANDBY/ON
DVD.
When your DVD player turns on or off, you have entered the
correct code.
correct code.
To change the transmittable signals for
operating another manufacturer’s VCR
operating another manufacturer’s VCR
1 Press and hold STANDBY/ON
VCR.
2 Press VCR.
3 Enter a manufacturer’s code using buttons 1 – 9,
and 0.
Manufacturer
Codes
JVC
01*, 02, 03
Emerson
10, 22
Gold Star
11
Hitachi
04
Mitsubishi
12
NEC
21
Panasonic
07, 13
Philips
09
RCA
05, 06
Samsung
20
Sanyo
17, 18, 19
Sony
14, 15, 16
Zenith
08
* “01” is the initial setting.
4 Release STANDBY/ON
VCR.
Now you can perform the following operations on the VCR:
STANDBY/ON
VCR: Turn on and off the VCR.
VCR CH +/–:
Change the TV channels on the
VCR.
VCR.
After pressing VCR, you can perform the following operations
on the VCR:
on the VCR:
3:
Start playing.
REW:
Rewind the tape.
FF:
Fast-forward the tape.
7:
Stop playing or recording.
8:
Pause playing. To resume, press
3.
REC PAUSE:
Enter recording pause.
To start recording, press this button then
To start recording, press this button then
3.
5 Try to operate your VCR by pressing
STANDBY/ON
VCR.
When your VCR turns on or off, you have entered the correct
code.
code.
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
VCR, try each one until the correct one is entered.
MENU
ENTER
4
7/P
10
2
8
6
Manufacturers’ codes are subject to change without notice.
If they are changed, this remote control cannot operate the
equipment.
If they are changed, this remote control cannot operate the
equipment.
Operating Other Manufacturers’ Video Equipment
28-34_RX-5060B[C].p65
05.12.24, 12:33
32