ONKYO TX-SR508 사용자 설명서
47
En
If you’ve connected your Zone 2 speakers to the AV
receiver, as explained in “Connecting Your Zone 2 Speak-
ers Directly to the AV receiver” (
receiver, as explained in “Connecting Your Zone 2 Speak-
ers Directly to the AV receiver” (
“Front High/Zone2” setting to “Zone2”.
Menu
Hardware
Note
• When “Zone2” is selected and Zone 2 turned on, the Zone 2
speakers connected to the FRONT HIGH OR ZONE2 L/R
speaker terminals output sound, but the surround back or front
high speakers connected to the SURR BACK OR FRONT
HIGH L/R speaker terminals do not. When “Zone2” is selected
and Zone 2 turned off, the surround back or front high speakers
output sound as normal.
speaker terminals output sound, but the surround back or front
high speakers connected to the SURR BACK OR FRONT
HIGH L/R speaker terminals do not. When “Zone2” is selected
and Zone 2 turned off, the surround back or front high speakers
output sound as normal.
• When the “Front High/Zone2” setting is set to “Zone2” and the
input selector of Zone 2 is selected, power consumption on
standby mode slightly increases.
standby mode slightly increases.
• Powered Zone 2 cannot be used if “Speakers Type” is set to
“Bi-AMP” (
This section explains how to turn Zone 2 on and off, how
to select an input source for Zone 2, and how to adjust the
volume for Zone 2.
to select an input source for Zone 2, and how to adjust the
volume for Zone 2.
Controlling Zone 2 from the AV receiver
Note
• While Powered Zone 2 is being used, listening modes that
require surround back and front high speakers (6.1/7.1), such as
Dolby Pro Logic IIz Height, Dolby Digital EX, and DTS-ES are
unavailable.
Dolby Pro Logic IIz Height, Dolby Digital EX, and DTS-ES are
unavailable.
• When the “Front High/Zone2” setting is set to “Zone2” and the
input selector of Zone 2 is selected, power consumption on
standby mode slightly increases.
standby mode slightly increases.
Setting the Powered Zone 2
1
Press
RECEIVER followed by SETUP.
The setup menu appears.
2
Use
q/w to select “Hardware”, and then press
ENTER.
3
Use
q/w to select “FrontHigh/Zone2”, and e/r to
select “Zone2”.
`
Zone2:
FRONT HIGH OR ZONE2 L/R speaker ter-
minals activated (Powered Zone 2 enabled).
minals activated (Powered Zone 2 enabled).
Using Zone 2
1
To turn on Zone 2 and select an input source, press
ZONE 2 on the AV receiver followed by an input
selector button within 8 seconds.
ZONE 2 on the AV receiver followed by an input
selector button within 8 seconds.
Zone 2 turns on, the ZONE 2 indicator lights.
To select AM or FM press the TUNER input selector
button repeatedly.
(North American models) You can also select SIR-
IUS.
button repeatedly.
(North American models) You can also select SIR-
IUS.
To select the same source as that of the main room,
press ZONE 2 repeatedly until “Z2 Selector:
Source” appears on the display.
press ZONE 2 repeatedly until “Z2 Selector:
Source” appears on the display.
Note
• You cannot select different AM or FM radio stations for
your main room and Zone 2. The same FM/AM radio sta-
tion will be heard in each room.
tion will be heard in each room.
2
To turn off Zone 2, press
OFF on the AV receiver.
OFF
ZONE 2
–/+
ZONE 2 indicator
Input selector buttons