ONKYO TX-L55 사용자 설명서
42
Using the Listening Modes
—Continued
The following table lists all of the listening modes and indicates which ones can be used with each signal format.
About the “Speakers necessary” Column
●
2 or more: can be selected with any speaker setup.
●
3 or more: can be selected only if you’re using a center speaker or surround speaker.
●
4 or more: can be selected only if you’re using surround speakers.
●
With surr bk: can be selected only if you’re using a surround back speaker.
❍❍
: can be selected if the Dolby Digital/DTS setting is set to “On” (see page 43).
❍
:
can
be selected if the Dolby Digital/DTS setting is set to either “On” or “Auto” (see page 43).
What to Do If You Can’t Select a Listening Mode
• Is the source component connected digitally? The
Dolby Digital and DTS listening modes can be
selected only if your DVD player is connected to the
TX-L55 with a digital audio (coaxial or optical) con-
nection (see page 23).
selected only if your DVD player is connected to the
TX-L55 with a digital audio (coaxial or optical) con-
nection (see page 23).
• The Dolby Digital or DTS listening modes can be
selected only when the input signal is Dolby Digital or
DTS, respectively.
DTS, respectively.
• Check the digital output settings on the source compo-
nent. If the digital output is set to PCM, change it so
that other signal formats can be output as well.
that other signal formats can be output as well.
Input Signal Formats & Listening Modes
Mode
button
Input signal format
PCM/analog
PCM
96 kHz
Dolby Digital
DTS
3/2.1,
etc
2/0
(stereo)
1/0
(mono)
3/2.1,
etc
2/0
(stereo)
96/24
1
1.
For DTS 96 kHz/24-bit material, if the listening mode is Stereo or DTS 96/24, audio is processed at 96 kHz. For all other listening
modes, it’s processed at 48 kHz.
modes, it’s processed at 48 kHz.
DTS-ES
Input source
Cassette, CD,
video, radio,
TV, LD, etc
DVD 96k/
24bit, etc
24bit, etc
DVD-Video, etc
DVD-Video, LD, CD, etc
Listening mode
Speakers
necessary
[DIRECT] Direct
2 or more
●
●
[STEREO]
Stereo
●
●
●
●
●
●
●
●
2
2.
“DTS96Stereo” will appear on the display.
●
Main+Sub
Main
Sub
[SURR
OUND]
Dolb
y Pro
Logic II
PLII movie
3
3.
If you’re using surround back speakers, the Dolby Pro Logic IIx modes will be used instead.
3 or more
●
●
●
PLII music
3
●
●
●
PLII game
3
●
●
●
Dolb
y Pro
Logic IIx
PLIIx movie
With surr bk
●
●
●
PLIIx music
●
❍❍
●
❍❍
●
PLIIx game
●
●
●
Neo:6 Cinema
3 or more
●
Neo:6 Music
4 or more
●
Dolby Digital
3 or more
●
●
Dolby Digital EX
With surr bk
❍
DTS
3 or more
●
●
DTS 96/24
3 or more
●
DTS-ES Discrete
With surr bk
❍
(Discrete)
DTS-ES Matrix
❍
(Matrix)
DTS+Neo:6
❍❍
❍❍
DTS+Dolby EX
❍❍
❍❍
[DSP]
Mono
2 or more
●
Onky
o or
iginal
DSP modes
Orchestra
4 or more
●
Unplugged
4 or more
●
Studio-Mix
4 or more
●
TV Logic
4 or more
●
All Ch St
4 or more
●
Tip: To check the format of the input signal, see “Displaying Source Information” on page 46.
TX-L55_En.book Page 42 Tuesday, June 1, 2004 9:02 AM