ONKYO TX-DS787 사용자 설명서
25
Connecting to the IR IN MAIN input
Outline
If the TX-DS787 is located inside a cabinet or other enclosure
where the infrared beams from the remote controller cannot enter,
then operation with the remote controller will not be possible. In
such a case, it will be necessary to install a remote sensor at a
location outside of the cabinet for the infrared beams from the
controller to reach.
where the infrared beams from the remote controller cannot enter,
then operation with the remote controller will not be possible. In
such a case, it will be necessary to install a remote sensor at a
location outside of the cabinet for the infrared beams from the
controller to reach.
1. Connect the connecting block to the IR IN
MAIN input at the TX-DS787.
2. Install the remote sensor at a location where it
can detect the infrared beams from the remote
controller.
controller.
3. Connect the remote sensor to the connecting
block.
ANTENNA
R
L
VIDEO
AM
FM
75
ZONE 2
MAIN
IR IN
HOME THEATER CONTROLLER
RC-390M
Outside of the cabinet
Remote sensor
Remote controller
Connecting block
TX-DS787
Mini plug cable
Power supply
Wall outlet
In the cabinet