ONKYO TXNR727 사용자 설명서

• The AV receiver may not work as normal depending on the 

circumstance even though the AV receiver is placed within 
the 15 meters range. In such cases, get the Bluetooth-
enabled device closer to the AV receiver and retry the 
operation.

• When disconnecting on your Bluetooth-enabled device, 

BLUETOOTH indicator on the AV receiver will go off.

• If there is no sound output even after the pairing is done 

successfully, consult the instruction manual of the 
Bluetooth-enabled device, and then select the model name 
of the AV receiver as the audio output device.

• While connected to a Bluetooth-enabled device, the AV 

receiver cannot be detected and a connection cannot be 
established from another Bluetooth-enabled device.

• If you cannot connect with a paired Bluetooth-enabled 

device, perform the pairing operation between the AV 
receiver and the Bluetooth-enabled device again.

• Due to the characteristic of Bluetooth wireless technology, 

the sound played on the AV receiver may slightly delay from 
the sound played on the Bluetooth-enabled device.

• The on-screen information appears only on a TV that is 

connected to HDMI outputs.

This section explains how to play music files from a 
USB device (e.g., USB flash drives and MP3 players).
See also:
• “Network/USB Features” (

).

• While the message “Connecting...” appears on the AV 

receiver’s display, do not disconnect the USB cable 
supplied with the USB device from the USB port.

You need to connect the AV receiver to your home 
network (

). 

• The on-screen information appears only on a TV that is 

connected to HDMI outputs.

TuneIn is a new radio service which offers the music, 
sports and news all over the world. 
Over 70,000 radio stations and 2 million on-demand 
programs are registered, and you can easily enjoy 
them by selecting stations or programs of your 
choice. TuneIn is preprogrammed on the AV receiver.

• When establishing a connection with the AV receiver, 

select the profile (A2DP, AVRCP) at the Bluetooth-
enabled device. If the Bluetooth-enabled device does 
not support the AVRCP profile, you cannot perform 
playback or other operations with the AV receiver.

• For details on the Bluetooth connection, refer to the 

instruction manual of the Bluetooth-enabled device.

Once the AV receiver is detected and the 
model name of the AV receiver appears on the 
display of your Bluetooth-enabled device, 
select the model name.
When a Bluetooth connection is established 
successfully, BLUETOOTH indicator will light.

• The model name appeared on the display of your 

Bluetooth-enabled device is “Onkyo TX-NR727”.

*

Bluetooth-enabled device, enter “0000”.
The AV receiver only supports numerical 
passkey up to 4 digits.

* Passkey may be called “Passcode”, “PIN code”, “PIN 

number” or “Password”.

Play back the desired music on the Bluetooth-
enabled device.
The audio is output from the AV receiver.

Plug your USB device into the AV receiver’s 
USB port.
The USB indicator lights. It will flash if the AV 
receiver cannot read the USB device.

Press ENTER.
A list of the device’s contents appears. To open a 
folder, use 

q/w to select it, and then press 

ENTER.

q/w to select a music file, and press 

1 to start playback.

Press NET.
The network service screen appears, and the 
NET indicator lights. If it flashes, the AV receiver 
is not connected to the network correctly. If wired 
LAN connection is selected, verify that the 
Ethernet cable is firmly connected to the AV 
receiver. If wireless LAN connection is selected, 
verify that the Wi-Fi indicator lights.

• The same operation can be done by selecting 

“Network Service” in the Home menu.

q/w/e/r to select “TuneIn” and then