ONKYO HT-RC460 사용자 설명서

■

`

`

On 

This setting specifies whether or not to apply the Late 
Night processing on a Dolby TrueHD source.

• When this setting is set to “Off”, the Late Night function for 

Dolby TrueHD sources is automatically fixed to “Off” 
(

).

■

`

0 to 2 to 5

The DTS Neo:6 Music listening mode creates 6-channel 
surround sound from 2-channel stereo sources. With this 
setting, you can specify by how much the front left and 
right channel output is attenuated in order to create the 
center channel. 
Changing the value from “0” to “5” will spread the sound 
of the center channel to left and right (outwards).

■

`

Wide:

Select if the listening angle is greater than 30 degrees.

`

Narrow:

Select if the listening angle is less than 30 degrees.

With this setting, you can optimize the Theater-
Dimensional listening mode by specifying the angle of the 
front left and right speakers relative to the listening 
position. Ideally, the front left and right speakers should be 
equidistant from the listening position and at an angle close 
to one of the two available settings.

• For best results, we recommend setting “

” to 20° and 

“Wide” to 40°.

Items can be set individually for each input selector.

■

`

Off 

`

Movie:

Select this setting for movie material.
The Audyssey indicator will light.

`

Music:

Select this setting for music material.
The Audyssey indicator will light.

• When “Audyssey Quick Start” has been used for measurement, 

“Audyssey” cannot be selected.

• Audyssey equalizing does not work with DSD sources.

Front left speaker

Front right speaker

Listening angle: 30°

Preparation
Press the input selector buttons to select an input source.

The tone for each speaker is set automatically by 
Audyssey 2EQ

®

 Room Correction and Speaker Setup. 

To enable the following settings, you must first perform 
the Room Correction and Speaker Setup (

• These technologies cannot be used when:

– a pair of headphones is connected, or
– Direct listening mode is selected.

“Setup”